Green Sukabumi Stone

Green Sukabumi Stone Tiles
Green Sukabumi StoneCourtesy:  Camstone Cambodia

Green sukabumi stone is a hard quartzite metamorphic rock which was originally sandstone. Green sukabumi stone is converted into quartzite through heating and pressure usually related to tectonic compression within orogenic belts. Pure quartzite is usually white to grey, though quartzites often occur in various shades of pink and red due to varying amounts of iron oxide (Fe2O3). Other colors, such as yellow and orange, are due to other mineral impurities.

When sandstone is metamorphosed to quartzite, the individual quartz grains recrystallize along with the former cementing material to form an interlocking mosaic of quartz crystals. Most or all of the original texture and sedimentary structures of the sandstone are erased by the metamorphism. Minor amounts of former cementing materials, iron oxide, carbonate and clay, often migrate during recrystallization and metamorphosis. This causes streaks and lenses to form within the quartzite.

Orthoquartzite is a very pure quartz sandstone composed of usually well rounded quartz grains cemented by silica. Orthoquartzite is often 99% SiO2 with only very minor amounts of iron oxide and trace resistant minerals such as zircon, rutile and magnetite. Although few fossils are normally present, the original texture and sedimentary structures are preserved. The term is often misused, and should be used for only tightly-cemented metamorphic quartzites, not quartz-cemented quartz arenites. The typical distinction between the two (since each is a gradation into the other) is a proper quartzite is so highly cemented, diagentically altered, and metamorphosed that it will fracture and break across grain boundaries, not around them.

Green sukabumi stone is very resistant to chemical weathering and often forms ridges and resistant hilltops. The nearly pure silica content of the rock provides little to form soil from and therefore the quartzite ridges are often bare or covered only with a very thin layer of soil and little vegetation.
(source: http://en.wikipedia.org/wiki/Quartzite)

Green Stone

(Click on the picture to get more information related the product)

Aplication :

  • Suitable for pavers and tiles that in hight traffic application.

Cut Available :

  • Thickness tollerance :± 2mm
  • Lenght/Width tollerance : ± 1mm
  • Measurement Order : Cut to order with max cutting 300×600 mm
  • Thickness : Cut to order with minimum 15 mm

Finishing :

  • Honed
  • Polish
  • Sawn

Please note colour variations are normal in natural stone. These images only represent the general appereance that found in this product.